Are you on the hunt for a robust, space-efficient, and stylish DIY desk that can keep up with your bustling workspace? Look no further than the power of Bunnings and your own craftsmanship. With a few sheets of plywood and some basic tools, you can create a stunning, practical Bunnings DIY desk with drawers that will be the envy of your colleagues and friends.
The best part? This desk won't break the bank, and you'll have the satisfaction of knowing you built it with your own hands. So, let's roll up our sleeves and dive into this exciting project. Here's a step-by-step guide to help you bring your dream desk to life.
Designing Your Perfect Bunnings DIY Desk with Drawers
Before you head to your local Bunnings, you'll want to sketch out a rough design of your desk. Consider the dimensions, style, and functionalities you need. For this guide, we'll assume a desk that's 180cm wide, 80cm deep, and 75cm high, with two drawers.
Once you have your design, make a list of materials and tools you'll need for your Bunnings shopping trip. Here's a suggested list to get you started:
- 1 sheet of 18mm thick plywood (2440mm x 1220mm)
- 1 sheet of 15mm thick plywood (2440mm x 1220mm)
- Drawer slides (2x 700mm fully extended undermount soft close)
- Hinges (4x 100mm full overlay)
- Screws (1.6mm x 20mm\phi: 200 pack) and (2.4mm x 40mm\phi: 50 pack)
- Wood glue
- Sander and sandpaper (120 and 240 grit)
- Power drill
- Ruler
- Pencil
- Maßtemplates or a CNC router (optional)
Cutting the Plywood
Using your design as a guide, measure and mark the plywood for cutting. For this desk, you'll need to cut:
- 2x 180cm x 80cm (desk top and base)
- 2x 180cm x 40cm (long sides)
- 2x 80cm x 40cm (short sides)
- 2x 180cm x 10cm (drawer fronts)
- 2x 70cm x 35cm (drawer sides and back)
- 2x 15cm x 35cm (drawer bottoms)
If you have access to a CNC router, you can create a template to ensure accurate and safe cutting. Otherwise, use a jigsaw or circular saw to cut the pieces following your measurements.
Assembling the Desk Base
Start by applying wood glue to the edges of the base pieces. Then, attach the long sides to the short sides using 1.6mm screws. Reinforce the corners with wood glue and clamps if necessary. Allow the glue to dry according to the package instructions.
Once the glue is dry, attach the 15mm THICK Plywood to the base to create the desk top. You can choose to leave it as is or add a decorative edge banding to give it a finished look. Sand down any rough edges and prepare for assembly.
Building the Drawers
Now that the desk base is complete, it's time to tackle the drawers. Begin by attaching the drawer sides to the fronts using wood glue and 2.4mm screws. Reinforce the corners with clamps and allow the glue to dry.
Installing the Drawer Slides
Mark where the drawer slides will be mounted. Measure 50mm from the top and 20mm from the front of the opening, then attach the slides to the base of the desk using M6 screws. Ensure the slides are level and parallel to one another.
Attach the corresponding slides to the drawers using M5 screws. Make sure the drawers are a snug fit and run smoothly on the tracks. Adjust the slides as needed to achieve the perfect fit.
Finishing Touches
Sand the entire desk, including the drawers, with 120-grit sandpaper to remove any rough edges or tool marks. Follow up with 240-grit sandpaper for a smooth finish. Wipe away any dust with a damp cloth.
Once the desk is sanded, it's time to apply your chosen finish. You can use paint, stain, or a clear sealant to protect the desk and bring out its natural beauty. Allow the finish to dry according to the package instructions.
Now, step back and admire your handiwork! With a bit of patience and craftsmanship, you've created a stunning Bunnings DIY desk with drawers that will serve you well for years to come. Happy creating!