◆Smart Home Ideas Journal

Fix Leaky Tap: How to Change a Kitchen Faucet Washer

By

Does your kitchen faucet seem a bit wonky lately? Perhaps it's dripping water (wasting precious resources), or it's not running as smoothly as it once did. You might suspect a worn-out tap washer is the culprit. Fear not, for replacing a tap washer isn't rocket science. In fact, it's a simple DIY task that can save you a considerable amount of money and time. Let's dive in and explore how to change a tap washer on a kitchen mixer tap.

Before we proceed, remember that water can be your biggest enemy during this task. To avoid any unnecessary mess or electrical hazards, ensure the water supply to your tap is switched off at the mains. You can usually find the isolating valve under the sink or behind the appliance. Once the water is off, open the tap to release any lingering pressure.

Gathering Your Tools and Materials

Before we get our hands wet, we need to make sure we have all the necessary tools and materials at our disposal. The good news is, changing a tap washer doesn't require an extensive toolkit.

How to Change a Tap Washer
How to Change a Tap Washer
a kitchen sink with the words how to change the washer in your tap
a kitchen sink with the words how to change the washer in your tap
How to Change a Tap Washer
How to Change a Tap Washer

The tools and materials you'll need include:

  • Screwdriver (usually a Phillips head)
  • Adjustable pliers
  • New tap washer
  • Penetrating oil (optional)
  • Rags or towels

Identifying the Issue

Before we jump straight into the replacement procedure, it's a good idea to identify the exact problem. In most cases, a dripping faucet is caused by a worn-out ceramic disc or a faulty rubber washer. The latter is the part we're interested in today. Rubber washers degrade over time due to wear and tear, as well as exposure to minerals in water.

Repairing a dripping tap by washer replacement and regrinding seat
Repairing a dripping tap by washer replacement and regrinding seat
How to Change a Tap Washer
How to Change a Tap Washer
a hand holding a red and silver object in it's left hand with the other hand
a hand holding a red and silver object in it's left hand with the other hand

To check if your rubber washer is indeed the source of the trouble, remove the handle or the top part of your tap. This should expose the tap's ceramic discs or cartridge, which will allow you to identify the washer and check its condition.

Preparation: Accessing the Washer

Now that you've identified the washer, it's time to access it. This step might vary slightly depending on the type of your kitchen tap. Most modern mixer taps use a cartridge, while traditional taps rely on a set of ceramic discs.

For cartridge taps:

How To Change A Washer On A Bathroom Lever Tap?
How To Change A Washer On A Bathroom Lever Tap?
How to Fix a Dripping Tap and Reseat a Tap Valve
How to Fix a Dripping Tap and Reseat a Tap Valve
Changing a Tap Washer
Changing a Tap Washer
How To Replace A Tap Washer
How To Replace A Tap Washer
How to Change a Kitchen Tap
How to Change a Kitchen Tap
a kitchen sink with the words easily fix this on it and an image of a faucet
a kitchen sink with the words easily fix this on it and an image of a faucet
  1. Remove the decorative cap or escutcheon (if present) using a screwdriver.
  2. Unscrew the screw on top of the handle and remove the handle itself.
  3. Loosen the cartridge retaining clip (if present) and remove it.

For ceramic disc taps:

  1. Remove the handle or cover just like with cartridge taps.
  2. Locate the adjustor ring (usually black) and remove it using adjustable pliers.

Pro tip: If the handle or any other part of your tap doesn't budge, don't force it. Apply a few drops of penetrating oil and wait for a couple of hours before trying again. This should help loosen the seized threads and make the process smoother.

Removing the Old Washer

With the inner workings of your tap exposed, it's time to remove the old washer. In most cases, the washer is held in place by a retaining clip. Use your pliers to carefully remove it, taking care not to bend or damage it.

How to Change a Tap Washer
How to Change a Tap Washer
Your Guide to Replacing Tap Washers | QS Supplies
Your Guide to Replacing Tap Washers | QS Supplies
Change a tap washer
Change a tap washer
Changing a Kitchen Tap
Changing a Kitchen Tap
How to Change a Tap Washer
How to Change a Tap Washer
How to replace the washers in your taps
How to replace the washers in your taps
How To Change A Tap Washer
How To Change A Tap Washer
Changing a Mixer Tap (Narrowboat or House)
Changing a Mixer Tap (Narrowboat or House)
How to change or a tap washer to stop dripping tap or replace the type of washer
How to change or a tap washer to stop dripping tap or replace the type of washer
How to repair a Mixer Tap leaking at the swivel base.
How to repair a Mixer Tap leaking at the swivel base.
How to Change a Tap Washer. How to Fix a Dripping Tap.
How to Change a Tap Washer. How to Fix a Dripping Tap.
Replacing a kitchen tap is a DIY skill you need to know. Here an expert tells you how
Replacing a kitchen tap is a DIY skill you need to know. Here an expert tells you how
How To Change a Kitchen Tap - Plumbing Tips
How To Change a Kitchen Tap - Plumbing Tips
How To Change a Kitchen Tap - Plumbing Tips
How To Change a Kitchen Tap - Plumbing Tips

Once the clip is out, you should be able to see the old washer. Carefully remove it, ensuring not to lose any small parts in the process. If your tap uses a ceramic disc system, you might also need to remove the worn-out disc itself.

Replacing the Washer

Now that the old washer is out, it's time to replace it with a new one. When purchasing a new washer, make sure to get an exact match for your tap model. It's a good idea to take the old washer with you to your local hardware store to ensure a perfect fit.

To install the new washer, simply reverse the removal process. Place the new washer in position, ensuring it's facing the correct way, and replace the retaining clip. For ceramic disc taps, remember to reassemble the inner parts in the correct order.

Testing Your New Washer

With the new washer installed, it's time to turn the water supply back on and test your handiwork. Slowly open the isolating valve and let water flow through the tap. Check for any leaks or drips, and adjust the washer if necessary. If everything works as it should, you've successfully replaced your kitchen tap washer!

Remember, it's essential to occasionally inspect your tap's washer, especially if you're experiencing any issues with water flow or dripping. Regular maintenance can extend the life of your tap and prevent costly repairs in the future.

And there you have it! Changing a tap washer isn't as daunting a task as it first appears. With the right tools and a little patience, you can save a considerable amount of money by tackling this common household repair yourself. So, what are you waiting for? Tighten your apron strings, grab your tools, and dive in. Your kitchen (and your wallet) will thank you!