Cisco's Smart Install feature streamlines the initial device configuration process, enabling quick and secure network setup. If you're wondering which Cisco devices support Smart Install, you're in the right place. This guide walks you through the supported devices and key aspects of this handy tool.
Deploying and configuring Cisco devices can be a complex task, especially in large-scale networks. Smart Install simplifies this process by allowing autonomous configuration, reducing human error, and expediting deployment times.
Cisco Device Series Supported by Smart Install
The support for Cisco Smart Install varies by device series. Here are the key Cisco device series that can act as either a client or a server, or both, for Smart Install:
Before proceeding, ensure your Cisco IOS Software version is compatible with Smart Install. You can find the supported software versions on Cisco's official documentation.
Cisco Router Series
Smart Install supports a broad range of Cisco router series, including but not limited to:
- ISR 4000 Series
- ISR 3000 Series
- ISR 2900 Series
- ISR 1100 and 2100 Series
- ESR 5500 Series
- ASR 1000 Series
Cisco Switch Series
Several Cisco switch series support Smart Install, such as:
- Cat 9300 Series
- Cat 9200 Series
- Cat 9100 Series
- Cat 8000 Series
- Cat 6000 Series
- Cat 4500E Series
- Cat 3850 Series
- Cat 3650 Series
- Cat 2960-X Series
- Cat 2960 Series
Smart Install Modes
Cisco devices can operate in different modes when using Smart Install. Understanding these modes is crucial for successful deployment:
Smart Install supports two primary modes - Autonomous and Manual. In Autonomous mode, the device configuration is performed automatically. In Manual mode, the user configures the Smart Install parameters through the CLI.
Smart Install Autonomous Mode
Autonomous mode is the most widely used, as it automates the configuration process. Here's how it works:
- The smart client discovers the smart server using the management VLAN.
- The smart client sends a request to the smart server for a configuration.
- The smart server responds with the configuration, and the smart client applies it.
Smart Install Manual Mode
In Manual mode, the user configures Smart Install parameters through the CLI. Here's an example of how to configure the Smart Install server on a Cisco IOS device:
enable
configure terminal
!
username secret
!
ip auth symmetric-crypto key-string
!
username role network-admin
!
int gigabitEthernet
ip address
no shutdown
!
hostname
!
end
Using this guide, you should now have a clear understanding of which Cisco devices support Smart Install and the modes in which they can operate. Streamlining your network deployment with Cisco Smart Install can significantly improve efficiency and reduce operational costs.