Connecting your device to eduroam, the global roaming wireless network for research and education, ensures secure and seamless connectivity across multiple locations. This guide walks you through the process, ensuring your device stays connected with minimal efforts.
To begin, ensure you have functional internet access. If your device is connected to another network, temporarily disconnect it to avoid connectivity issues.
Connecting to eduroam on a Laptop or Desktop
This section focuses on setting up eduroam on common computing devices.
Whether you're using a Windows, Mac, or Linux device, the initial steps remain consistent. Begin by connecting to eduroam as you would any other Wi-Fi network, selecting "eduroam" from the available networks and clicking "Connect".
Entering Your Credentials
When prompted for credentials, enter your institution's username (usually in the format of username@institution.edu) and your institution's password. Your credentials are case-sensitive, so be sure to type them precisely as you would when logging into your institution's email or other services.
If your institution supports it, you may be able to use an institution-specific username and password instead of the full email address. Check with your institution's IT department to confirm this.
Installing the eduroam CAT Tools
In some cases, especially for Windows and macOS users, you may need to install additional software (CAT - Configuration Assistant Tool). These tools simplify the process and ensure your device maintains eduroam connectivity even after rebooting or disconnecting from the network. Visit the eduroam CAT page, select your device's operating system, and download the appropriate software.
Install the CAT tool, launch it, and follow its prompts. It will pre-configure your device to connect to eduroam using your institution's WPA2 Enterprise security settings, which include credentials and security certificates.
Connecting to eduroam on a Mobile Device
Connecting to eduroam on smartphones and tablets requires manual configuration, unlike laptops and desktops.
If you're using an iOS or Android device, navigating to Settings and selecting "Wi-Fi" will reveal available networks. Tap "eduroam", then "Connect" to access the network.
Managing EAP Method and Phase 2 Authentication
At this point, you'll be prompted to select an EAP (Extended Authentication Protocol) method. Choose "PEAP" or "TTLS" as instructed by your institution. You may also need to configure Phase 2 authentication, usually set to "MS-CHAPv2" or "GTC".
If you're not sure, consult your institution's IT department for precise guidance on these settings.
Entering Your Credentials on Mobile Devices
Once you've selected your EAP method, you'll be prompted to enter your institution's username (e.g., username@institution.edu) and password. Enter them carefully, as they're case-sensitive.
After submitting your credentials, your device will attempt to connect to eduroam. Allow some time for the process to complete, and you should now be connected to the global research and education network.
Remember to keep your device's Wi-Fi connection to eduroam enabled to maintain connectivity across various eduroam-compatible locations. Traveling between institutions or countries? No problem. eduroam ensures your device stays connected to the world's largest education and research network.