The ecobee Premium Smart Thermostat is not just a device; it's a step towards a more energy-efficient and comfortable home. Installing this innovative thermostat can lead to significant savings on your energy bills, thanks to its advanced learning capabilities and integration with smart home systems. Let's dive into the process of installing this premium smart thermostat.
Before we begin, make sure you have the following items: your ecobee Premium Smart Thermostat, a screwdriver, a drill (if walls are drywall), wire strippers, and a wire connector. Ensure your home's wiring is compatible with the thermostat, and if you're uncertain, consider hiring a professional.
Replacing Your Existing Thermostat
Begin by turning off power to your HVAC system at your home's main electrical panel. Remove the faceplate of your existing thermostat and unscrew the base. Take a picture of the wiring connections for reference during the installation.
Using a voltage tester, ensure there's no power at the terminals before disconnecting the wires. Once confirmed, unscrew the wire connectors and carefully remove the wires.
Preparing the Mounting Plate
ecobee's Premium Smart Thermostat comes with a backplate that needs to be installed first. Position the backplate so the arrow points upwards, and the wires fit comfortably. Mark the screw holes with a pencil, then drill (if necessary) andattach the backplate using the provided screws.
Route the wires through the backplate, ensuring there's enough slack. Gently push the wires back into the wall until only the backplate is visible.
Wiring the ecobee Thermostat
Match the wires from your existing thermostat to the corresponding colors on the ecobee thermostat. Tighten the screws securely, but be careful not to over-tighten and damage the wires. Use wire connectors to join any wires that were previously combined.
Once all wires are connected, press the ecobee thermostat onto the backplate, ensuring it's securely attached. The display should turn on and walk you through the setup process.
Initializing and Connecting to Wi-Fi
The ecobee thermostat will guide you through the initial setup. Follow the on-screen instructions to connect to your home's Wi-Fi network. If you have a sensor, you'll be prompted to pair it during this process.
After connection, the thermostat will ask for your location and details about your HVAC system. Provide this information to help the thermostat optimize its performance.
Installing the PEK (Power Extender Kit)
If your thermostat requires additional power, you'll need to install the PEK. Connect the PEK's wire to the 'C' or 'Common' wire, then route the PEK's other wire to a power source (usually the power company's wire). Attach the PEK to the wall using the provided screws.
The PEK should be installed in a location where it won't be damaged, usually near the furnace or air handler. Ensure the wire connecting the PEK to the thermostat is long enough to reach without being overly loose.
Finishing Up
With the PEK installed, power up your HVAC system and test the thermostat to ensure it's functioning correctly. You can now use the ecobee app or web portal to control and monitor your home's temperature remotely.
Your new ecobee Premium Smart Thermostat is now ready to optimize your home's comfort and energy efficiency. Enjoy the convenience and savings that come with this advanced technology. Regularly update the thermostat's firmware to ensure it's running the latest and most efficient software.