Tired of the hassle of keys? EZ Lock is here to simplify your daily routine. Our intuitive lock system allows you to secure your home, office, or locker with just a simple tap. But before you dive into the world of keyless entry, you'll need to know how to install your EZ Lock system. Fear not, our step-by-step guide will walk you through the process.
From gathering your tools to testing your new lock, we've covered it all. So, let's get started on your journey to a more convenient, keyless future. Remember, safety and accuracy are key, so take your time and follow these instructions closely.
Unboxing and Understanding Your EZ Lock Kit
Before you start, it's crucial to understand what's in your EZ Lock kit. Open your box carefully and you should find:
- The EZ Lock deadbolt or lever
- The EZ Lock control unit
- The strike plate and screws
- The faceplate and mounting screws
- The installation template
- The handing plate
- The programming card
- Batteries
- Installation instructions (which you're reading now)
Once you've familiarized yourself with the contents, gather your tools. You'll need a screwdriver, a drill (if your door requires pre-drilling), and a level.
Preparing Your Door
Before you start, measure your door to ensure your EZ Lock is a perfect fit. Next, decide on the location of your lock, keeping in mind that the inside portion should be no more than 30 inches from the door handle's top. Trace the template provided onto your door, then mark where you'll drill your pilot holes.
If your door requires pre-drilling, do so now. Make sure your holes are the right size for your EZ Lock kit. If you're unsure, consult the included measuring guide or watch our how-to video.
Installing the EZ Lock Control Unit
With your pilot holes drilled, it's time to install the control unit. Begin by aligning the unit with your door's edge, using the handedness plate to ensure proper alignment. Secure the control unit temporarily with the screws provided.
Next, insert the batteries. Your EZ Lock will chirp to indicate that it's powered up. Now, remove the handedness plate. Take your control unit and align it with the marks you made earlier. Secure it with the provided screws, ensuring it's level and flush with the door.
Installing the EZ Lock Deadbolt or Lever
Now that your control unit is secure, it's time to install the deadbolt or lever. If you're using a lever, attach the inside lever to the latch tailpiece with the provided setscrew. Next, align the deadbolt or lever with your door's edge and secure it temporarily.
Insert the mounting screw through the back of the door into the hole in the latch. Secure the bolt or lever with the second screw, ensuring it's level and operating smoothly.
Attaching the Faceplate and Strike Plate
With your EZ Lock now secure, it's time to finish up with the faceplate and strike plate. Align your faceplate with the bolt or lever and secure it temporarily. Ensure it's level, then secure it permanently.
For the strike plate, align it with the door's edge and secure it on the frame. Make sure it's level and securely attached. If your door requires adjustments to the strike, use the adjustment screw to fine-tune the fit.
Programming Your EZ Lock
Now that your EZ Lock is installed, it's time to program your user codes. Start by pressing and holding the "Program" button on the control unit. You'll hear a chirp, then a series of beeps. Enter your master code (default is 1234) and #.
To add a user code, enter your master code, then press "A". Enter your desired user code (between 4 and 8 digits) and #. Repeat this process to add up to 16 user codes. When you're done, exit the programming mode by pressing the "Home" button.
Congratulations! Your EZ Lock system is now installed and programmed. Test it out by locking and unlocking your door with your new codes. Keep your user codes secure and change your master code regularly for optimal security.
Remember, EZ Lock's convenience is only as good as its maintenance. Regularly check your batteries and replace them when needed. With proper care, your EZ Lock system will continue to provide keyless convenience for years to come. Happy unlocking!