The 18th edition of the wiring regulations, also known as the IET Wiring Regulations, has significantly expanded and revised the guidelines on kitchen zones. This update reflects the evolving design, technology, and safety concerns in modern kitchens.
As the hub of the home, kitchens today are not just spaces for cooking but also for socializing, working, and even living. This transformation has necessitated a revision of electrical safety and distribution standards in the IET's 18th edition.
Understanding Kitchen Zones in the 18th Edition
第18版引入了更详细的厨房区域分类,以提供更明显的安全标准和规划指南。这个分类是基于风险和使用频率为不同区域设置的,冀望为设计者和电工提供清晰的路线图。
Three main kitchen zones are now defined in the 18th edition: Zone 1, Zone 2, and Zone 3, each with distinct electrical requirements.
Zone 1: High Risk Area
Zone 1 is the highest risk area, typically above and behind the hob or cooker. It's subject to high temperatures, steam, and splashing of water.
In the 18th edition, the size of Zone 1 has been increased to incorporate taller extractors and to provide more clarity on the shape of the zone. Electrical fittings in this area are subject to higher ingress protection (IP) ratings. Only specific fittings, as listed in the regulations, should be used in Zone 1.
Zone 2: Medium Risk Area
Zone 2 encompasses the area around Zone 1, typically extending 600mm either side and 600mm in front of the hob or cooker. It's subject to a lower level of risk but still poses sufficient hazards to require careful electrical planning.
The 18th edition has clarified that only specific fittings, as listed in the regulations, should be used in Zone 2. Additionally, the regulations now specify that electrical outlets supplying fixed appliances should be at a height of no more than 1m in Zone 2 to reduce the risk of accidental contact.
Electrical Distribution for Kitchens in the 18th Edition
The 18th edition provides more detailed guidance on the electrical distribution needed to support modern kitchens.
Kitchens now often require higher capacity installations to support increased power demand from appliances and additional circuits for lighting and sockets.
Circuit Requirements
The 18th edition has increased the number of socket outlets required in a kitchen to at least seven, encouraging the use of additional ring circuits.
Moreover, the regulations now require that, in new structures, at least one of the circuits should be an SPI (switched, portable circuit) to supply portable appliances. This change reflects the growing use of small appliances in kitchens and the need to minimize trailing leads.
Circuit Protection
To cope with the increased power demand, the 18th edition has revised the circuits' protective device sizes. For example, the regulations now specify a 32A circuit breaker for at least one ring circuit in Zone 1 and Zone 2 to accommodate the higher power rating of modern appliances.
Additionally, the regulations now require a residual current circuit breaker (RCCB) for all kitchen circuits, providing enhanced protection against electrical shocks.
In light of these revisions, it's crucial for both homeowners and professionals to stay updated with the IET's 18th edition when planning or executing electrical work in the kitchen. Understanding the latest guidelines ensures electrical safety, minimizes future problems, and maximizes the lifespan of electrical systems.