Transform your ordinary door lock into a smart, connected device with the Kwikset Convert Smart Lock Conversion Kit. This innovative solution allows you to upgrade your existing deadbolt to a keyless, app-controlled smart lock, without replacing your entire lock mechanism. Here, we'll guide you through the smooth and straightforward installation process, ensuring your new smart lock is up and running in no time.
Before you begin, gather your conversion kit, which includes the smart lock motor, strike plate, faceplate, internal and external escutcheons, batteries, and installation tools. Also, ensure you have a compatible Kwikset app on your smartphone to control and manage your new smart lock.
Unboxing and Preparation
Start by removing all components from the box and place them on a flat surface. Familiarize yourself with each part, ensuring nothing is missing or damaged. Next, gather any additional tools you might need, such as a screwdriver, a drill, and a tape measure.
Measure your door to ensure the conversion kit components fit correctly. Typical door sizes are around 1 3/8" or 1 3/4", but it's always best to double-check to avoid any potential issues.
Removing the Existing Faceplate
Begin the installation process by removing your current faceplate. Use a flathead screwdriver to pry off the faceplate, starting at the bottom and working your way up. If your current faceplate is stuck due to paint buildup, you may need to use a utility knife to score the paint along the edges before prying it off.
Once the faceplate is removed, use a cloth or brush to clean any remaining paint or debris from the door. This will ensure a smooth and secure installation of your new smart lock components.
Installing the Strike Plate
The strike plate is the metal plate that sits on the door frame, guiding thebolt into the lock. Align the strike plate with the existing screw holes on the door frame. Mark the locations of the screw holes using a pencil, then drill pilot holes if necessary to facilitate screw installation.
Secure the strike plate to the door frame using the provided screws. Make sure the strike plate is level and properly aligned with the door's bolt. If your door frame is made of metal, you might need to use a drill with a metal bit to create pilot holes before installing the screws.
Installing the Smart Lock Motor
The smart lock motor is the brains of your new smart lock system. It's responsible for londing and unlocking your door using the Kwikset app or physical locks. Before installation, ensure the motor is fully charged and the battery cover is securely fastened.
Align the motor's strike plate with the existing strike plate on the door frame. Secure the motor to the door frame using the provided screws. Make sure the motor is level and centered on the door frame. Be careful not to overtighten the screws, as this could crack the door frame or damage the motor.
Installing the Internal Escutcheon
The internal escutcheon covers the gap between the door and the door frame, providing a finished look and protecting the lock mechanism from debris. Align the internal escutcheon with the interior faceplate and secure it to the door using the provided screws.
Ensure the internal escutcheon is properly aligned with the door and the smart lock motor. If the internal escutcheon is not properly aligned, the door may not latch or unlock correctly.
Installing the External Escutcheon and Faceplate
Align the external escutcheon with the door and the smart lock motor. Secure the external escutcheon to the door using the provided screws. Next, align the faceplate with the external escutcheon and secure it to the door using the provided screws. Make sure the faceplate is properly aligned with the external escutcheon and the smart lock motor.
Once both escutcheons and the faceplate are installed, test the smart lock motor by opening and closing the door. The motor should engage and lock the door when it's closed and fully engaged with the strike plate.
Connecting to the Kwikset App
With the physical installation complete, it's time to connect your new smart lock to the Kwikset app. First, ensure your smartphone has a stable internet connection. Then, open the Kwikset app and follow the on-screen instructions to add your new smart lock.
When prompted, enter the pairing code provided with your conversion kit. This code is used to securely connect your smart lock to the Kwikset app. Once the pairing code is accepted, your smart lock is now connected to the app, and you're ready to start enjoying the convenience of keyless entry.
Configuring Your Smart Lock
With your smart lock connected to the Kwikset app, you can start customizing its settings. Create user codes for friends and family, set up automated locking and unlocking schedules, and enable notifications to stay informed about your lock's activity.
You can also connect your smart lock to compatible smart home systems, such as Amazon Alexa, Google Home, or Apple HomeKit, for seamless voice control and automated routines. To do this, follow the instructions provided by your smart home system's manufacturer.
Now that your Kwikset Convert Smart Lock Conversion Kit is installed and configured, you can enjoy the convenience of keyless entry and remote locking and unlocking. With the Kwikset app, you'll always know who's coming and going, and you can rest assured that your home is secure. Embrace the future of home security and start exploring the countless possibilities of smart lock technology.