Enhance your home security and convenience with Kwikset's Smart Locks, and follow our helpful instructions to get started. Whether you're tech-savvy or new to smart home devices, our comprehensive guide will walk you through the process step by step.
Before diving into the installation and setup process, make sure to have the following materials ready: your Kwikset Smart Lock, the appropriate screwdriver, a paperclip (for resetting the lock), and your smartphone with the Kwikset app installed.
Unboxing and Preparation
Begin by unboxing your new Kwikset Smart Lock and ensure you have all the necessary components: the lock assembly, mounting hardware, Strike plate, four AA batteries (for the internal backup power), and the setup guide.
Double-check that the lock you've received matches the model you ordered, as Kwikset offers different types with varying features like touchpad, SmartKey, or keypad inclusion.
Check for Required Components
Carefully inspect the packaging to ensure you have all the necessary items. If anything is missing, don't hesitate to contact Kwikset's customer support for assistance.
Verify that the deadbolt's length and features suit your door. Most Kwikset Smart Locks have a standard 2-3/8" backset, but double-check the specification in the event of a custom-type door.
Gathering Essential Tools
Before starting the installation, ensure you have the appropriate screwdriver, such as a Phillips or flathead, depending on the type of screws provided with the lock.
You'll also need a strong, sturdy ladder to safely access the top of your door, as well as a hammer to lightly tap the strike plate into place if needed.
Installing the Kwikset Smart Lock
With all necessary components and tools at hand, follow these steps to install your Kwikset Smart Lock:
The first step involves removing your existing lock or knob. Start by unscrewing the thumbturn or knob's retainer ring at the edge of the door, then carefully pull the entire assembly out from the inside.
Remove Previous Lock Hardware
After removing the inner lock assembly, begin dismantling the exterior hardware. First, extract the lock cylinder from the door using the appropriate tool. This usually involves gently prying it out or unscrewing it, depending on the lock type.
Next, remove the exterior escutcheon, which may be held in place by screws or a retainer ring. Once the escutcheon is off, you should be able to see the faceplate that secures the deadbolt to the door.
Mount the Deadbolt on the Door
Before installing the Kwikset Smart Lock, ensure that the deadbolt's faceplate is properly aligned with the hole in the door. Use the correct screws provided with your lock to affix the faceplate securely.
After attaching the faceplate, install the deadbolt assembly by inserting the tailpiece of the lock through the center hole of the faceplate, ensuring it engages with the lock cylinder or motor (depending on your lock model). Secure the deadbolt in place with the provided screws.
Connecting the Kwikset Smart Lock to the App
Once the deadbolt is securely installed, it's time to connect your new Kwikset Smart Lock to the Kwikset app on your smartphone. This process allows you to remotely control and manage your lock, create virtual keys, and monitor lock activity.
Begin by installing the Kwikset app on your iOS or Android device, then create an account or sign in using your existing details.
Pairing the Smart Lock with the App
Open the Kwikset app and tap on "Add a Lock" to begin the pairing process. Select your lock model from the list, then follow the on-screen instructions to connect your lock to the app.
The app will guide you through the steps of enrolling your lock, which may involve placing your phone near the lock and activating a coding process. Follow the instructions closely, and ensure your lock is properly enrolled in the app.
Firmware Update and Configuration
After successfully adding your Kwikset Smart Lock to the app, you'll be prompted to update its firmware. Firmware updates ensure your lock has the latest features and security improvements, so it's essential to keep it up-to-date.
Follow the in-app instructions to perform the firmware update. In most cases, you'll be asked to hold your finger on the lock's screen or press a specific button while the update is in progress.
Setting Up User Codes and Features
With your Kwikset Smart Lock enrolled in the app and firmware updated, it's time to configure your lock's settings and create user codes for added convenience and security.
Begin by creating a primary user account, which will have full control over your lock and its features. You can create additional user accounts with varying levels of access as needed.
Creating User Codes
To create a new user code, open the Kwikset app and navigate to the settings or user management section of your lock. Tap on "Add User Code," then enter a 4-8 digit code for the new user.
You can also assign specific access rights to each user code, such as permitted entry times or temporary access via virtual keys.
Exploring Additional Features
In the app's settings, you'll find various features to enhance your Kwikset Smart Lock experience. Customize your lock's name, enable notifications for lock activity, or adjust time zones and language preferences.
Additionally, discover advanced features like locking automation, scheduled lock events, and integration with other smart home devices supported by the Kwikset app.
Congratulations! You've successfully installed and configured your new Kwikset Smart Lock. Enjoy the peace of mind and added convenience that come with this state-of-the-art home security solution. Regularly update your lock's firmware and change user codes as needed to ensure the ultimate security and performance for your smart lock.