◆Smart Home Ideas Journal

DIY Zigbee Hub: Control Your Smart Home like a Pro

By

Looking to dive into the world of IoT but feeling apprehensive about the cost of dedicated hubs? Why not consider building your own Zigbee hub? Not only is it cost-effective, but it's also a great way to learn about low-power wireless networks and gain hands-on experience with hardware and software development. Let's explore how you can make your own Zigbee hub using readily available components and open-source software.

Zigbee, a low-power, low-data-rate wireless communication protocol, is perfect for creating IoT networks, especially for smart home applications. It operates in the 2.4 GHz frequency range and has a reasonable transmission range, making it an excellent choice for building local area networks.

Understanding Zigbee and XBee

Before we dive into building our Zigbee hub, let's grasp the basics of Zigbee and XBee, which will be the backbone of our project.

Zigbee2MQTT – An easy guide on how to have all your Zigbee devices under your full control
Zigbee2MQTT – An easy guide on how to have all your Zigbee devices under your full control
Does Zigbee need a hub to work? | My Dream Haus
Does Zigbee need a hub to work? | My Dream Haus
DIY Zigbee Temperature and Humidity Meter with XIAO ESP32C6✨
DIY Zigbee Temperature and Humidity Meter with XIAO ESP32C6✨

Zigbee is an IEEE 802.15.4-based WPAN standard for building wireless personal area networks. It's designed for low-power, low-data-rate, and high-reliability communication. Its main applications include home automation, smart meters, and building automation.

XBee Modules

XBee modules are wireless communication devices that use the Zigbee protocol. They come in various flavors, such as XBee 3 and XBee S2C, supporting different features and form factors. For our project, we'll focus on the XBee 3 Pro, which is a versatile, long-range, and high-power module.

Smart Home DIY: Build Zigbee Devices Yourself with ESP32-C6!
Smart Home DIY: Build Zigbee Devices Yourself with ESP32-C6!
DIY home automation hub for $20
DIY home automation hub for $20
What Is Zigbee and How Can It Make Your Home Smarter?
What Is Zigbee and How Can It Make Your Home Smarter?

The XBee 3 Pro supports both Zigbee 3.0 and legacy Zigbee protocols, making it an excellent choice for building a future-proof Zigbee hub.

Zigbee Hub Architecture

At the heart of our DIY Zigbee hub lies the XBee 3 Pro module, which connects to a USB-to-Serial (UART) converter, providing compatibility with our host computer. The host computer runs the Zigbee hub software, enabling communication with other Zigbee devices and processing their data.

In addition to the XBee module, we'll need a few other components, such as a USB-to-Serial converter, a breadboard, jumper wires, and some power supply. All these components are readily available and budget-friendly.

How to Set Up Zigbee Smart Plugs with Home Assistant 2026
How to Set Up Zigbee Smart Plugs with Home Assistant 2026
Notes on Zemismart HomeKit Zigbee Hub
Notes on Zemismart HomeKit Zigbee Hub
Notes on NEO Tuya Zigbee HomeKit Hub
Notes on NEO Tuya Zigbee HomeKit Hub
Zigbee to MQTT gateway for less than $10 | Automated Home Party
Zigbee to MQTT gateway for less than $10 | Automated Home Party
ZigBee communication with the Pi 2 and Windows IoT Core
ZigBee communication with the Pi 2 and Windows IoT Core
OMNET++ ZIGBEE | Omnet simulator
OMNET++ ZIGBEE | Omnet simulator

Setting Up the Hardware

Assembling the hardware components is quite straightforward. First, connect the XBee 3 Pro module to the USB-to-Serial converter, ensuring the firmware is compatible with the Zigbee protocol. Then, wire the module to the host computer. For this project, we'll use an FTDI-based USB-to-Serial converter.

Using jumper wires and Spi ducts, connect the following pins between the XBee 3 Pro module and the FTDI module:

  • TX (XBee) to RX (FTDI)
  • RX (XBee) to TX (FTDI)
  • GND (XBee) to GND (FTDI)
  • VCC (XBee) to 3.3V (FTDI)

XTAL and RST Pins

XBee modules require a 3.3V supply to function correctly. Connect the 3.3V and GND pins of the FTDI module to the VCC and GND pins of the XBee 3 Pro, respectively. The XTAL (crystal) pin on the XBee module should be left unconnected, and the RST (reset) pin can be used to reset the module if needed.

ESP32-C6 Zigbee Light Switch: Build a Wireless Smart Switch
ESP32-C6 Zigbee Light Switch: Build a Wireless Smart Switch
What is Zigbee in IoT? Benefits & Applications Guide in 2025
What is Zigbee in IoT? Benefits & Applications Guide in 2025
Google Home: Mehrere Befehle kombinieren – so geht’s › JO🇧🇮ON
Google Home: Mehrere Befehle kombinieren – so geht’s › JO🇧🇮ON
ZigBee Technology : Architecture, Working and Its Applications
ZigBee Technology : Architecture, Working and Its Applications
an electronic device is connected to a smart phone and other components that are attached to it
an electronic device is connected to a smart phone and other components that are attached to it
Redirecting...
Redirecting...
Smart Home Hub - IoT Project
Smart Home Hub - IoT Project
Custom Jung/Ikea zigbee remote control - Share Project - PCBWay
Custom Jung/Ikea zigbee remote control - Share Project - PCBWay
Zigbee Hub: What It Is, Why You Need One, and the Best Options in 2026
Zigbee Hub: What It Is, Why You Need One, and the Best Options in 2026
Zemismart Zigbee Hub Setup 🐝 Configurar app Smart Life
Zemismart Zigbee Hub Setup 🐝 Configurar app Smart Life
Gateway Zigbee Tuya | Hub Zigbee cabeado Zemismart
Gateway Zigbee Tuya | Hub Zigbee cabeado Zemismart
Zigbee Controller, Zigbee Dimmer, Zigbee Home Automation
Zigbee Controller, Zigbee Dimmer, Zigbee Home Automation

Once you've made these connections, your Zigbee hub's hardware set-up is complete. The next step is to configure the software and establish communication with other Zigbee devices.

Configuring the Software

With the hardware in place, we can move on to configuring the software. This process involves installing the required drivers, configuring the XBee module's firmware, and setting up the Zigbee hub application. We'll use the popular open-source project, zigbee-herdsman, for our hub software.

The zigbee-herdsman project provides a Cross-Platform (Linux/Mac/Windows) Zigbee application framework. It supports various platforms like Arduino, ESP32, and Raspberry Pi, making it an excellent choice for our DIY Zigbee hub.

Installing Dependencies

Before setting up the zigbee-herdsman project, ensure you have the necessary dependencies installed on your host computer. You'll need:

  • Python 3.x (recommended)
  • Pip (Python package installer)

To install the required packages, run the following command in your terminal:

pip3 install -r https://raw.githubusercontent.com/Koenkk/zigbee-herdsman/master/requirements.txt

Cloning the Repository

Next, clone the zigbee-herdsman repository to your local machine:

git clone https://github.com/Koenkk/zigbee-herdsman.git

Navigate to the project directory and initialize the submodules:

cd zigbee-herdsman
git submodule update --init --recursive

Configure the XBee Module

Before running the zigbee-herdsman application, configure the XBee module's firmware. Download the Zigbee 3.0 firmware from the Digi website and flash it to your XBee 3 Pro module using a terminal program like Screen or PuTTY.

Ensure you configure the API mode and baud rate settings correctly. For the zigbee-herdsman project, set the API mode to AT, and the baud rate to 921600.

Running the Zigbee Hub

With the software and hardware components set up, we can finally run our DIY Zigbee hub using the zigbee-herdsman project. Launch the application by running the following command in your terminal:

python3 coordinator.py -c /dev/ttyUSB0 -b 921600

Replace /dev/ttyUSB0 with the appropriate serial port connected to your FTDI module. The -b option specifies the baud rate, set to match your XBee module's configuration.

You should now see output indicating that your Zigbee hub has started and is ready to communicate with other Zigbee devices. The next step is to add and manage devices using the zigbee-herdsman command-line interface (CLI).

Adding Devices

To add new Zigbee devices to your network, follow these steps:

  1. Power off the device
  2. Press and hold the join button on the device while powering it on again
  3. Run the following CLI command to add the device to your network:
    zbc join dev1

Replace dev1 with a suitable name for your device. The CLI will respond with the status of the join operation. Once added, your device is ready to communicate with your Zigbee hub.

Device Management

The zigbee-herdsman CLI provides a range of commands for managing devices on your network. Some essential commands include:

  • List devices: zbc list
  • Remove a device: zbc remove dev1
  • Send a message (e.g., to turn on a light): zbc send dev1 0x00 0x01 0x00

These commands enable you to interact with your Zigbee network, monitor device status, and send control signals.

There you have it – your very own Zigbee hub, ready to support your IoT projects! Building this DIY hub not only saves you money but also provides a deeper understanding of Zigbee networks and the low-power wireless landscape. As you continue exploring the world of IoT, consider expanding your hub's functionality with additional sensors, actuators, and automation capabilities. The possibilities are endless.