Boost your home's security and convenience with the MyQ Smart Garage Hub. This innovative device allows you to control and monitor your garage door from anywhere, eliminating the need for bulky remotes and providing peace of mind. Follow these comprehensive installation instructions to set up your MyQ Smart Garage Hub and enjoy its benefits today.
Before you begin, ensure you have the following items: MyQ Smart Garage Hub, garage door opener, Ethernet cable (if not using Wi-Fi), and your smartphone. The process requires basic technical skills and should take around 30 minutes to complete.
Setting Up Your MyQ Smart Garage Hub
The initial setup involves connecting your MyQ Hub to your garage door opener and setting up the MyQ app on your smartphone.
Connecting the MyQ Hub to Your Garage Door Opener
Start by powering off your garage door opener and removing the light shade. Gently insert the MyQ Hub into the head unit of your opener, ensuring it aligns properly.
Reattach the light shade, reconnect the power source, and turn your garage door opener back on. Ensure the MyQ Hub indicators are lit and functioning.
Setting Up the MyQ App
Download and open the MyQ app on your smartphone. Follow the on-screen instructions to create a new account or log in if you already have one.
In the app, select "Add Device" and choose "Garage Door Opener." Follow the prompts to complete the Wi-Fi setup, or use the Ethernet cable if Wi-Fi is unavailable. Once connected, name your garage door and add it to your MyQ account.
Connecting to a Wi-Fi Network
If you opted to use Ethernet during the initial setup, you'll need to connect your MyQ Hub to a Wi-Fi network for full functionality. This allows you to control and monitor your garage door remotely.
Before proceeding, ensure your Wi-Fi network name (SSID) and password are handy.
Preparing for Wi-Fi Connection
Perform the following steps to put your MyQ Hub in connection mode: 1. Press and hold the 'Plus' (>) button on the MyQ Hub for about 10 seconds until the status light starts blinking. 2. Locate your smartphone and connect to the temporary Wi-Fi network named 'MyQ-xxxx' (replace 'xxxx' with the last four digits of your Hub's serial number). 3. Open the MyQ app and go to Settings > Garage Doors. Select the garage door you want to connect to a Wi-Fi network.
Connecting to Your Wi-Fi Network
Once you've prepared your MyQ Hub for connection, follow these steps to connect it to your Wi-Fi network: 1. In the MyQ app, tap "Connect to Wi-Fi" and select your Wi-Fi network (SSID) from the list. 2. Enter your Wi-Fi password and tap "Connect." 3. If prompted, confirm that you want to connect to the new network. 4. Wait for the connection to complete. Once successful, you'll receive a confirmation message in the app.
The MyQ Smart Garage Hub allows you to monitor and control your garage door from anywhere, ensuring security and convenience. With your MyQ Hub successfully installed and connected to your Wi-Fi network, explore the features and enjoy the peace of mind that comes with having a smarter garage.