The Primo water dispenser, a popular choice for purified water at home or in the office, comes with a filtration system that ensures you get great-tasting, clean water. A critical aspect of maintaining your dispenser's performance is knowing where to locate the filter and understanding how to replace it. Let's delve into this, ensuring you get the most out of your Primo water dispenser.
Before we dive into the filter's location and replacement process, let's appreciate why filters are crucial. Primo's filters remove contaminants like chlorine, lead, and other impurities, enhancing the water's taste and promoting healthier hydration.
The Primo Water Dispenser Filter: Location and Access
Primo water dispensers have a compact, sleek design, leaving some users curious about where the filter is hidden. The filter is cleverly integrated into the unit's base, ensuring it's out of sight but easy to access.
Locating the filter doesn't require any tools or disassembly of the dispenser. Here's how to find it:
Bottom-Loading Dispensers
Primo's bottom-loading models, like the Stage 1 or Stage 2 dispensers, have the filter cartridge at the bottom. To access it, follow these steps:
- Roll the dispenser onto its back.
- Locate the panel at the bottom of the dispenser, covers the filter compartment.
- Remove the panel by pushing it inwards and then sliding it towards you.
- You'll now see the filter cartridge. It's held in place by a twist-lock mechanism.
Top-Loading Dispensers
For top-loading models, such as the Primo Classic II, the filter is located at the back, towards the top. Here's how to find it:
- Tilt the dispenser forward slightly to access the back panel.
- Locate the filter housing. It's a cylindrical chamber with a cap that twists off.
- Twist the cap counterclockwise to remove it and expose the filter cartridge.
Filter Replacement: A Step-by-Step Guide
Now that you've located your Primo water dispenser's filter, it's time to learn how to replace it. Regular filter changes ensure your water stays pure and delicious. Replace your filter every 40 gallons or about once every 3-4 weeks, depending on your water usage.
Before you start, ensure you have a new, genuine Primo filter cartridge handy. Here's how to replace your filter:
Removing the Old Filter
Before removing the old filter, prepare a container for any water that may drip out:
- Turn off the power to your dispenser.
- Empty any water remaining in the dispenser's reservoir.
- Locate the filter (as explained in the previous section).
- Gently twist the old filter counterclockwise to remove it from the twist-lock mechanism or the filter housing cap.
Installing the New Filter
With the old filter removed, you're ready to install the new one:
- Wet the new filter briefly under the tap to remove any dust and prepare it for use.
- Insert the new filter into the filter compartment or filter housing, ensuring it's facing the correct direction.
- Gently twist the filter clockwise to secure it in place. For bottom-loading dispensers, you might need to press down slightly while twisting.
- Turn the power back on, and your dispenser is ready to dispense fresh, filtered water.
Congratulations! You've successfully located and replaced your Primo water dispenser's filter. By performing this simple maintenance task regularly, you'll ensure your dispenser continues to provide you with clean, great-tasting water. Happy hydrating!