Elevate your home security and smart living experience with a Supersonic Smart WiFi Camera Doorbell. This advanced device combines the functionality of a camera, doorbell, and smart speaker, offering peace of mind and convenience. Here's a step-by-step guide to help you with its installation process.
Before we delve into the installation instructions, ensure you have the following components and tools ready: your Supersonic Smart WiFi Camera Doorbell, a screwdriver (Philips #2), chime adapter (if required), and a smartphone with the Supersonic app installed.
Unboxing and Preparation
The unboxing of your Supersonic Smart WiFi Camera Doorbell should reveal the following: the doorbell unit, power kit, mounting plate, screw batons, masonry drill bit, and, in some cases, a chime adapter. Carefully remove these components from the packaging, ensuring none are damaged.
Before proceeding with the installation, inspect the area where you'll be mounting the doorbell. Ensure the wall is flat and free from obstructions. If you're mounting it on a masonry or brick wall, you'll need to use the provided masonry drill bit. For wooden or drywall surfaces, a standard drill bit will suffice.
Mounting the Doorbell
Using the appropriate drill bit, carefully mark and drill holes into the wall. Ensure the holes are level and positioned correctly. Then, insert the screw batons into the holes and screw them firmly into place. These batons will hold the mounting plate.
Next, slot the mounting plate over the screw batons, sliding it up until it's flush with the wall. Tighten the screws on the mounting plate to secure it firmly to the wall. Now, you're ready to attach the doorbell unit to the mounting plate.
Connecting the Wires
Before mounting the doorbell unit, connect the wires from the power kit to the unit itself. If you're using a chime adapter, connect it now. The exact connections depend on your doorbell's model, so refer to your device's user manual or the Supersonic app for detailed instructions.
Once connected, align the doorbell unit with the mounting plate and push it into place. Secure it by screwing it firmly onto the mounting plate. Ensure the button and camera lens are at the correct height and position.
To WiFi or Not to WiFi?
With the doorbell physically installed, it's time to connect it to your WiFi network. This step is crucial for the doorbell to function as a smart device, allowing you to view live footage, receive notifications, and trigger chime sounds from your smartphone.
To connect your Supersonic Smart WiFi Camera Doorbell to your WiFi network, open the Supersonic app on your smartphone. The app will guide you through the process, requiring you to select your WiFi network and enter your password. Follow the on-screen instructions carefully to ensure a smooth connection.
Pairing the Doorbell and Chime Adapter
Once connected to your WiFi, the app will guide you through pairing your doorbell with the chime adapter (if used). Ensure both devices are powered on and within range of each other. In the app, select the 'Add Device' option, choose your Supersonic doorbell model, and follow the prompts to pair the devices.
Upon successful pairing, you can customize your chime sounds, adjust motion detection sensitivity, or change other settings within the Supersonic app. If you encounter any issues, refer to the app's troubleshooting guide or contact Supersonic's customer support for further assistance.
Congratulations! You've successfully installed and set up your Supersonic Smart WiFi Camera Doorbell. Now, enjoy the convenience of knowing who's at your doorstep, no matter where you are. Stay connected, stay secure, and happy smart living!