Enhance your home security and convenience with the Vivitar doorbell camera. This smart device allows you to see, hear, and speak to visitors at your doorstep, even when you're not home. Here's a step-by-step guide to help you with the Vivitar doorbell camera installation process.
Before you start, gather the necessary tools: your new Vivitar doorbell camera, screwdriver, drill, level, and a power drill bit. Also, ensure you have a stable Wi-Fi connection for the setup.
Preparation and Wiring
Before mounting the Vivitar doorbell camera, prepare the wiring. If your existing doorbell is already wired, you can utilize the existing wires. Otherwise, you'll need to run new wires.
Power your Vivitar doorbell camera using the existing doorbell's wires. For the Vivitar model, you'll typically connect the black wire to the transformer's low-voltage side, while the white wire goes to the transformer's high-voltage side. Ensure you follow the manufacturer's guidelines for safe and accurate wiring.
Removing the Old Doorbell
Start by turning off the power to your doorbell at the circuit breaker. Unscrew the old doorbell from the wall, and disconnect the wires. Be careful not to damage the wires.
To remove the old doorbell, you might need to remove the faceplate first. Using a screwdriver, gently pry off the faceplate from the wall. Once removed, disconnect the wires from the old doorbell and discard it.
Installing the Vivitar Doorbell Camera
Before attaching the Vivitar doorbell camera, ensure the area is level. Mark the position of the screw holes using a pencil, then drill pilot holes if needed.
Position the Vivitar doorbell camera against the wall, aligning it with the pilot holes. Using the provided screws, secure the camera to the wall. Ensure the wafer washer is in place between the screw head and the camera for a proper seal.
Connecting to Wi-Fi and Completing the Setup
Once the Vivitar doorbell camera is securely installed, it's time to connect it to your Wi-Fi network and complete the setup. Before proceeding, ensure your smartphone has the Vivitar app installed and is connected to the same Wi-Fi network as the doorbell camera.
Power on the Vivitar doorbell camera. Open the Vivitar app, tap on the '+' icon to add a new device, and follow the on-screen instructions. The app will guide you through the remainder of the setup process, including creating an account, connecting to Wi-Fi, and registering the doorbell camera.
Positioning the Camera and Chime
Position the Vivitar doorbell camera lens slightly above the door peephole for the best view of visitors. Adjust the camera's angle if needed using the app's live view feature.
Place the doorbell chime (if included) in a convenient location near an electrical outlet. Plug it in and connect it to the same Wi-Fi network as the doorbell camera. Ensure the chime is within range of the doorbell camera's wireless signal.
Testing and Troubleshooting
Test your Vivitar doorbell camera by pressing the doorbell button. You should receive a notification on your smartphone, and the live video feed should display. Answer the call to hear and speak to the visitor at your doorstep.
If you encounter any issues, double-check your Wi-Fi connection, ensure the camera is securely connected to the app, and verify the chime is properly synced with the camera. If needed, contact Vivitar's customer support for further assistance.
Congratulations! You've successfully installed your Vivitar doorbell camera and enhanced your home security. Regularly check the app to stay informed about visitors and enjoy the convenience of a smart doorbell camera system.