Imagine enjoying a hot shower, doing the dishes, or washing your hands without the worry of running out of hot water. An Ecosmart 11 Tankless Water Heater can make this a reality, as it provides continuous hot water on demand. If you're considering installing one, you've come to the right place. This comprehensive guide will walk you through the process, helping you understand each step in a clear and concise manner.
The Ecosmart 11 is a popular choice for its energy efficiency and ability to provide hot water for one or two taps simultaneously. It's important to note that professional installation is recommended for safety and to ensure the unit's longevity. Let's dive into the installation process, exploring the key steps and subtleties along the way.
Understanding Your Ecosmart 11 Tankless Water Heater
Before getting started, it's crucial to understand your unit. The Ecosmart 11 is an electric tankless water heater, which means it heats water as it passes through, rather than storing it in a tank. It's also important to know that it's rated at 13kW (11kW thermal and 2kW standby), with a flow rate of 2.5 gallons per minute at a 60°F temperature rise.
Familiarizing yourself with the unit's specifications will help you determine the best location for installation and ensure it meets your hot water needs.
Preparation and Tools Needed
Before you start, ensure you have all the necessary tools and supplies. You'll need a screwdriver, pliers, a drill, electrical tape, dielectric grease, and Teflon tape. It's also a good idea to have a helper on hand to assist with the unit's heavy lifting and positioning.
Additionally, make sure you have the right electrical wiring based on the unit's requirements. For the Ecosmart 11, you'll need 240V and a total of 55 amps of power.
Locating the Perfect Spot for Your Ecosmart 11
Choose an installation location that's close to the point of use and accessible for servicing. The Ecosmart 11 can be wall-mounted, either indoors or outdoors. If you're installing it indoors, make sure the area is well-ventilated to avoid the risk of carbon monoxide buildup (though this isn't a concern for the electric model).
Also, consider the incoming water and electrical connections. The unit's inlet and outlet should match your plumbing's tee-ins, and the electrical connection should be within reach and up to code.
Safety First: Turning Off Power and Water
Before beginning any work, ensure the safety of you and your property. This involves two critical steps:
a. **Turning Off the Power**: Locate your home's electrical panel and turn off the breaker connected to the appliance's circuit. Use a non-contact voltage tester to confirm the wire is dead.
b. **Turning Off the Water**: Shut off the cold water supply to the water heater. A valve near the unit should accomplish this. Also, open a hot water tap to relieve any pressure in the lines.
Draining the Water Lines
Once the water supply is shut off, drain the existing water heater, if any. This step prepares the pipes for the new unit's installation. You can do this using the heater's drain valve, connected to a hose leading towards a drain or outdoors.
After draining, flush the lines to remove any sediment or residue. This step ensures optimal performance and longevity of your new Ecosmart 11.
Installing the Ecosmart 11 Unit
Now that you've prepared the site, it's time to install the unit itself. Position the Ecosmart 11 according to your chosen location. Ensure it's level and secure, as it will sustain heavy use.
Secure the unit to the wall using the provided template and mounting screws. Make sure it's sturdy and level to prevent potential issues during operation.
Plumbing and Electrical Connections
With the unit securely in place, you can begin connecting the plumbing and electrical components.
Plumbing Connections
Connect the water supply lines to the unit's inlet. Use dielectric grease on the threads to prevent seizing. Then, connect the water heater's outlet to your home's plumbing. Use Teflon tape on the threads to create a watertight seal.
Once both connections are made, check for any leaks. Tighten as needed, but be careful not to overtighten, as this can strip the threads or cause leaks.
Electrical Connections
Connect the electrical wires to the unit's terminal block. Ensure you're using the correct wires and Follow the manufacturer's wiring diagram for precise connections. Use wire nuts to connect the wires, and remember to strip the insulation only as much as necessary to expose the contacts.
Once the electrical connections are made, double-check your work. Ensure the wires are correctly matched and securely connected.
Testing Your Ecosmart 11
With the installation complete, it's time to test your new Ecosmart 11. First, restore power to the unit by turning the breaker back on. Then, turn on a hot water tap nearby. As water flows, the unit should initiate and supply hot water on demand.
Monitor the unit to ensure it's operating correctly. Check for any leaks or unusual noises. If everything seems in order, your Ecosmart 11 tankless water heater is ready to deliver continuous hot water!
As a final note, while DIY installation can save you money, remember that professional installation is often recommended for peace of mind and assurance of your unit's longevity. Regular maintenance will also help extend the life of your Ecosmart 11, ensuring optimal performance year after year. So why not enjoy that first hot shower, knowing your water heater is ready to serve you, Whenever. Wherever.