The EcoSmart Eco 27 is not just a modern electric tankless water heater, it's an eco-conscious homeowner's dream. Energy-efficient, compact, and durable, it's designed to provide on-demand hot water while minimizing environmental impact. Let's delve into a step-by-step guide to help you install this innovative appliance.
Before we begin, ensure you have the necessary tools and skills. If you're not comfortable with any part of the installation, consult a professional plumber or electrician. Always follow local building codes and regulations.
Understanding Your EcoSmart Eco 27
The Eco 27 is specifically designed for point-of-use applications, perfect for heating water in a single sink, shower, or faucet. It's compact, fitting easily under sinks or in cabinets, and is easy to install with a few simple tools.
Understanding its capacities is key. It can heat water at a rate of 2.7 gallons per minute, making it ideal for applications where high flow rates aren't required. It operates with a standard 120V electrical system, using up to 5.5 kW power.
Familiarize Yourself with Components
Understandably, you may feel intimated by the various components on your Eco 27. The main body houses the heating element and control panel. Thefront panel, called the faceplate, is where you'll find the digital display and controls. Below it are the cold and hot water ports. On the side, you'll find the electrical junction box.
Before installation, carefully inspect all components to ensure they're in good condition. Check for any damage to the water ports, electrical connections, or the heating element.
Prepare Your Installation Site
To ensure a safe and secure installation, prepare your installation site thoroughly. For wall-mount installations, use the pre-drilled holes and screws provided. If you're installing it under a sink or cabinet, ensure there's adequate space and ventilation around the unit.
Always double-check that the area is clear of debris and potential obstructions. Tidy electrical wiring, secure cables, and ensure water supply lines are in good condition.
Installing the EcoSmart Eco 27: A Step-by-Step Guide
Now that you're familiar with your Eco 27 and the installation site, let's proceed with the installation.
Always start by turning off the power supply to the unit. Use a voltage tester to confirm that there's no electricity flowing to the Eco 27. Similarly, turn off the water supply to the installation site and drain any remaining water from the lines.
Connecting the Water Supply and Drain
Begin by connecting the Eco 27 to your water supply line. The cold water inlet is on the right, and the hot water outlet is on the left as viewed from the front of the unit. Ensure the water lines are securely tightened but not overtightened to avoid damaging the connections.
Before replacing the faceplate, connect the temperature probe to the unit. This probe helps the Eco 27 monitor the water temperature. After connecting it, replace the faceplate and ensure it's securely fastened.
Installing the Electrical Connections
Next, connect the electrical supply to the Eco 27. The electrical junction box is located on the side of the unit. Carefully connect the power wires as per the wiring diagram provided in your installation manual. Ensure all connections are secure and tight.
Once the electrical connections are secure, replace the junction box cover. If your Eco 27 is hardwired, ensure theeling is tight. If it's fitted with a power cord, plug it into a dedicated GFCI outlet and secure the cord using a strain relief clamp.
Performing the Initial Start-Up
With the water and electrical connections secured, you're ready for the initial start-up. Reconnect the water supply and turn on the power. Allow the Eco 27 to prime the system and heat the water for the first time.
Using the control panel, set your desired water temperature. The Eco 27 will heat the water to this temperature, and the digital display will show the current setting and temperature.
Testing the EcoSmart Eco 27
To test your newly installed Eco 27, open a hot water tap nearby. You should feel hot water almost instantly. The Eco 27's digital display will show the flow rate and water temperature as it operates. If the water temperature meets your setting and the flow rate is as expected, your installation is complete.
Regularly test your Eco 27 to ensure it's operating correctly. Check for any leaks, unusual noises, or electrical issues. If you notice any problems, consult a professional plumber or electrician.
Congratulations! You've successfully installed your EcoSmart Eco 27. Enjoy an abundance of hot water while being kind to the environment. Remember, regular maintenance, such as cleaning the heating element and monitoring electrical connections, will keep your Eco 27 performing at its best. Happy hot water savings!