Installing an EcoSmart Strip Light is a straightforward and rewarding task that can significantly enhance your space's aesthetics and ambiance. These energy-efficient LED light strips offer a simple, DIY way to illuminate your home or office, creating a warm and inviting atmosphere. Here's a comprehensive guide to help you through the process.
Before you begin, ensure you have all the necessary tools and materials. You'll usually find everything you need in the EcoSmart Strip Light kit, including the light strips, power adapter, connectors, and double-sided tape. Additionally, you might require a ruler, pencil, scissors, and possibly a drill (for mounting the power adapter).
Gather Your Tools and Materials
Unpack your EcoSmart Strip Light kit to ensure you have the following:
- EcoSmart LEDStrip
- Power Adapter (24V)
- Connectors (for extending or splitting the strip)
- Double-sided Tape
If you're planning to mount the power adapter, you'll also need:
- Drill (if not using the included screws)
- Drill bit (of the appropriate size for your wall)
- Screws
Measure Your Installation Area
Before cutting or mounting the strip, measure the length of the area where you'll be installing the light. EcoSmart Strip Lights come in various lengths (typically 32.8 feet or 10 meters), allowing you to customize the coverage. If needed, you can cut the strip to size or connect multiple strips together using the provided connectors.
Remember, you can cut the strip every 2.75 inches (7cm) along the marked lines. However, it's essential not to cut below the metal contacts on the strip, as this will disconnect the circuit.
Prepare Your Surface
Ensure the surface where you'll be installing the strip is clean, dry, and free of any debris. For surfaces like walls or ceilings, it's a good idea to lightly sand the area and then wipe it clean with a damp cloth to remove any dust.
For surfaces like shelves or cabinets, simply clean the area with a mild detergent and warm water, then allow it to dry completely before applying the double-sided tape.
Install the EcoSmart Strip Light
Now that you've prepared your surface and measured your installation area, it's time to install the EcoSmart Strip Light. Here's a step-by-step guide:
Mount the Power Adapter
Before installing the strip, mount the power adapter near your installation area. If you're installing the strip under a cabinet or behind a piece of furniture, you can mount the adapter out of sight elsewhere in the room. Use the included screws to mount the adapter, or use a drill to create your own screw holes.
Once mounted, connect the power adapter's cord to the first metal connector on the EcoSmart Strip Light. Plug the adapter into a nearby power outlet and turn on the power supply. The strip should now be working, and you can proceed to install the strip itself.
Install the LED Strip
Peel off the protective backing from the double-sided tape directly applied to the strip. Carefully align the strip along your measured installation area, ensuring it's straight and even. Press the strip firmly in place, starting from one end and working your way to the other. The double-sided tape should provide a secure hold.
If you've measured and cut your strip to size, ensure the cut end is not exposed. If it is, use the provided connector to connect the strip to an extension or another strip, ensuring the circuit remains unbroken.
Connect Additional Strips or Extensions
If you need to extend your light coverage or split it into multiple areas, you can use the included connectors to connect additional strips. Each EcoSmart Strip Light kit comes with multiple connectors, allowing you to expand your installation as needed.
Connecting Additional Strips
To connect two strips together, simple overlap the ends of the strips. Use a connector to ensure a secure connection. Ensure the arrows on the connector line up with the direction of the strip. If you need to connect more than two strips together, you can connect additional strips by following the same process.
Remember, each EcoSmart Strip Light can support up to 10 meters (32.8 feet) of strip, so you may need to connect multiple strips to achieve your desired coverage. Also, ensure your power adapter can support the increased length of the strip. If not, you may need to upgrade your power adapter or use multiple adapters for longer installations.
Splitting a Strip into Multiple Areas
If you want to split your strip into multiple areas, such as around two sides of a room or under two cabinets, you can use a splitter. If your kit didn't include a splitter, you can purchase one separately. Follow the same process as connecting additional strips, but instead of simply overlapping, you'll use the splitter to create multiple branches from a single strip.
Remember to keep the total length of the strip, including all branches, below 32.8 feet (or 10 meters) to avoid overloading the strip. Also, check your power adapter's capacity to ensure it can support the increased length.
Congratulations! You've successfully installed your EcoSmart Strip Light. The final step is to flick the lights on and enjoy the warm, inviting ambiance they create. If you have any further questions or need additional assistance, don't hesitate to consult EcoSmart's customer support or browse their online resources. Happy illuminating!